(800) 874-8146

24/7 Emergency Service

3 Tips To Dry Water Damage Faster


As soon as water damage occurs, a commercial building owner or manager should focus on stopping the flow and promoting drying. If clean, treated water from a supply line is the cause, drying may be sufficient. Disinfection may be necessary for contaminated water damage. Here are three water damage tips to promote speedy drying at a structure located in Queens, New York.

1. Remove All Standing Water
Standing water takes too long to dry on its own. A mop, wet-dry vacuum or pump may be effective, depending on the depth and quantity of water in a structure. Any cleaning tips for water damage assume that pooled water has been removed in advance. Category One water damage involving clean water can simply be dried, while areas exposed to contaminated Category Two gray water or Category Three black water should be disinfected before drying.

2. Increase the Interior Airflow
Promoting fast drying is one of the most effective expert restoration damage tips. Secondary damage, such as mold, is less likely to occur if a building owner or manager runs an industrial air mover or fans in an area that has recently been affected by water damage.

3. Lower Indoor Moisture Levels
A pipe burst or any other cause of major water damage can soak porous materials and raise relative indoor humidity levels. A dehumidifier can draw moisture out of the air and damp materials, reducing the risk of residual moisture that could otherwise lead to mold. Aim to keep humidity levels in the 30% to 50% range to avoid secondary damage. Levels in excess of 55% are more likely to support fungal growth.

Eliminating standing water, increasing air circulation and lowering humidity levels are essential damage tips for commercial buildings. The owner of a building should act quickly, as water damage can quickly lead to mold growth at a structure in Queens, New York.